Composite technologiesVideos

Phase 3 Cresim Cycle: Closing and Curing

In case of LIQUID LAYDOWN the still open mould is shuttled under the press, where the actual curing begins after its closing. The advantage of these method comes from the fact that the resin is already distributed on the surface and has to cover only a short distance to impregnate the matrix during the pressing stage. In case of HP-RTM or GAP-INJECTION the chemicals are injected into the mould in only one point spefically positioned. Suitable pressure shall be applied to spread the resin and resist to the internal expansion of the piece. The time that the chemicals require to polymerize (about 2-5 minutes) depends on the nature of the components of epoxy resins or compact polyurethanes

The main activity of Global Basalt Engineering LLC is creation of effective productions on release of continuous basalt fiber (СBF) with technologies of the last generation and composites on the basis of СBF (Basalt Fiber-Reinforced Polymer Composites as BFRP).


Companies: Cannon Spa

Technologies: Resin Transfer Moulding

Terms: Resin Transfer Moulding, resin transfer moulding (rtm), resin transfer moulding applications, resin transfer moulding machine, resin transfer moulding process

Back to top button